rivet nut installation tool hand handheld

#Rivet nut installation tool hand handheld install

Jay-Cee Sales & Rivet offers air hammer dies and multi-die sets for solid rivets and semi-tubular rivets.

#Rivet nut installation tool hand handheld install

These air hammers can install rivets from 3/16” to 5/16” in solid steel. We offer air hammers with various capacities, depending on the model. Available in both “C” style yokes and alligator styles. A heavier duty tool would be required to install the harder steel or hardest stainless steel 1/2-13 rivet nut.Our hand rivet squeezers are available in various capacities, depending on the model. Example: Install tool may be set up for a 1/2-13 rivet nut, but tool is only capable of installing a soft aluminum 1/2-13 rivet nut, and can not install a harder steel or hardest stainless steel 1/2-13 rivet nut.

Note: Material type of fastener is critical.

Please consult us on your exact fastener and application to assure you invest in the most capable tool for the job.

These are considered consumables of the tool, please keep backup(s) on hand!

Mandrel & Anvil required for each thread size.

Air Pressure: Regulate to 87 PSI (6.0 Bar) of clean dry air for best operation.

Manufacturer Part Number: Atlas® Riv 942 (Cardinal 9003).

Cycle Time: Up to 10 installs per minute.

Step 3: Once the fastener is installed, then pull the trigger FULLY to initiate the reverse feature that will spin the mandrel out of the installed fastener.

Step 2: Pull the trigger HALFWAY in order to initiate the installation sequence.

Step 1: The fastener will auto-feed onto the installation tool.

The “Pull to Stroke” feature of the 9003 is an Assembler and Quality Manager’s best friend for high-volume installation production environments, as it assures the nutsert is “stroked” the same distance on every install! This is good for when a factory is installing the same rivet nut in the same material over and over and over again. The user will screw the pressure knob into maximum pressure position (eliminating any pressure variations), then allow the gun to control the upset quality using the stroke control feature. “Pull to Stroke” allows the user to initially set-up the tool to a predetermined installation pulling stroke distance.“Pull to Pressure” is user friendly and good for varying material thicknesses or varying types of rivet nuts.

The tool will apply a standard foot pounds of pressure to successfully install every rivet nut, even including if the material thicknesses varies from install to install. “Pull to Pressure” allows the user to initially set-up the tool to a predetermined installation force.The 9003 is typically used to install rivet nuts and rivet studs and offers both / either “Pull to Pressure” or “Pull to Stroke” capability. The Bollhoff P3007 is currently unavailable so as an alternative, Cardinal’s 9003 Heavy Duty rivet nut installation tool (also known as Atlas® Riv 942 installation tool) offers heavy-duty workhorse capability, as well as the ability to be flexible for installing tiny threaded parts (as small as a 6-32 / M4).